No products
Prices are tax included
1 to 30 MHz
- Accessories
- Airband
- Amateurs
- Baluns
- Broadcast bands
- CB/27 MHz
- Coaxial cables
- Common mode filter
- Connectors
- Fixations
- Guy rope
- Haubanage
- Marine
- Mâts télescopiques
- Professional bands
- Spare parts
- SWL/Listeners
- Ununs
- Various
- Various bands
- Verticals
- VHF couplers
New products
-
SUPINC50, tilting bracket for 50 mm tube
2-piece tilting bracket with locking device for 50 mm diameter tube. The...
99,90 €
1 to 30 MHz There are 10 products.
ABLC, HF/50 MHz wired loop with...
Wired loop with a perimeter of 86 m, with non-inductive load, made of flexible copper wire and to be installed in a square approximately 10 m above the ground. Delivered with its robust balun and 4 insulators. Usable on the HF and 50 MHz bands. Teflon female PL connector.
289,90 €TTFD, Folded dipole 3-30 MHz
Dipole folded over non-inductive load operating from 3 to 30 MHz, length : 22 m, maximum power : 800 watts PEP, intended for users wishing an antenna quickly operational, broadband and without adjustment: military, professional, amateur radio, SWL, etc. It is also an interesting compromise in case of lack of space...
299,90 €LCB, Folded dipole 3-30 MHz
The LCB is designed on the basis of the TTFD, in addition to a central fixing bar for horizontal installation on a mat. It is therefore possible to install another antenna (VHF/UHF for example) above the LCB.
369,90 €TACTICAL, Folded dipole 1-30 MHz
The TACTICAL antenna is a dipole folded over a non-inductive load resistor. It is designed to operate from 1 to 30 MHz but especially for an optimal efficiency on low bands, below 10 MHz. It is intended for users who want a fast, operational, broadband and unadjusted antenna : military, professional, SWL, etc.
399,90 €HF PRO-8, Multiband vertical 3-50 MHz
8,25 m "versatile" whisk for use with a high-impedance automatic tuner type Icom AH-4, AT-140, AT-141, Kenwood KAT-1, Yaesu FC-40, etc. Whip consisting of 6 thick tubes (2 and 1,5 mm) in aluminum of 1,5 m, outer diameters 40 to 16 mm (the antenna tuner is not supplied).
249,90 €HF PRO-10, Multiband vertical 1,8-50 MHz
10,6 m "versatile" whisk for use with a high-impedance automatic tuner type Icom AH-4, AT-140, AT-141, Kenwood KAT-1, Yaesu FC-40, etc. Whip consisting of 6 thick tubes (2 and 1,5 mm) in aluminum of 2 m, outer diameters 40 to 16 mm (the antenna tuner is not supplied).
289,90 €HF MAX-10, broadband 1,8-70 MHz vertical...
10.8 m "versatile" whisk delivered with HF BOX and 1 wired radian. Can be used in high or low impedance from 1.8 to 70 MHz. Aluminum tubes, diameter 40 to 16 mm and weight 8 kg. Can be used with coaxial cable, single wire or "twin-lead" depending on the tastes ... Provide a suitable manual or automatic coupler.
399,90 €LWA II, Long wire 3-30 MHz + Choke Balun
LWA II, HF "Long wire" Wideband antenna with Choke Balun integrated, is perfect for the garden or portable SSB/CW operations ; week-end, holidays... Length: 20 m in 2.5 mm2 copper wire in black sheath with insulator and suspension hook. Frequencies: 3 to 30 MHz. Admissible power: 500 W (PEP). Works without a tuner on most bands. LWA series ITA antennas do...
189,90 €LWA-LB II, Long wire 1,5-30 MHz + Choke Balun
LWA-LB II, HF Long wire Wideband antenna with Choke Balun integrated, is perfect for the garden or portable SSB/CW operations ; week-end, holidays... Length: 40 m in 2.5 mm2 copper wire in black sheath with insulator and suspension hook. Frequencies: 1,5 to 30 MHz. Admissible power: 500 W (PEP). Works without a tuner on most bands. LWA series ITA antennas...
209,90 €HF MAX-8, broadband 3,5-70 MHz vertical...
8.25 m "versatile" whisk delivered with HF BOX and 1 wired radian. Can be used in high or low impedance from 3.5 to 70 MHz. Aluminum tubes, diameter 40 to 16 mm and weight 6.5 kg. Can be used with coaxial cable, single wire or "twin-lead" depending on the tastes ... Provide a suitable manual or automatic coupler.
359,90 €
